View PS2865-1_253308.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PHOTOCOUPLER
PS2865-1
HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE 4-PIN SOP PHOTOCOUPLER
-NEPOC Series-
DESCRIPTION
The PS2865-1 is an optically coupled isolator containing GaAs light emitting diodes and an NPN silicon phototransistor. The PS2865-1 meets insulation thickness 0.4 mm and BSIs insulation supplementary approved. The package has shield effect to cut off ambient light, and is mounted in a plastic SOP (Small Outline Package) for high density applications.
FEATURES
* Isolation distance (0.4 mm MIN.) * AC input response * High isolation voltage (BV = 2 500 Vr.m.s.) * SOP (Small Outline Package) type * High-speed switching (tr = 4 s TYP., tf = 5 s TYP.) * Ordering number of tape product: PS2865-1-F3, F4 * Safety standards: PS2865-1 * UL approved: File No. E72422 (S) * BSI approved: No. 8514, 8515
APPLICATIONS
* Modem * Programmable logic controllers * Power supply
Document No. PN10259EJ01V0DS (1st edition) (Previous No. P15094EJ2V0DS00) Date Published February 2003 CP(K)
The mark
shows major revised points.
PS2865-1
PACKAGE DIMENSIONS (UNIT: mm)
TOP VIEW
2.70.3
4 3
1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector
1
2
7.00.3
4.4
0.10.1
2.00.1
0.15+0.10 -0.05
0.50.3
1.27
0.40.1
0.12 M
PHOTOCOUPLER CONSTRUCTION
Parameter Air Distance Creepage Distance Isolation Distance Unit (MIN.) 4.5 mm 4.5 mm 0.4 mm
MARKING
PS2865-1
N65
003
Assembly Lot
Last number of type: 65 "N" of NEC
0 03
Week Assembled Year Assembled (Last 1 Digit)
2
Data Sheet PN10259EJ01V0DS
PS2865-1
ORDERING INFORMATION (Solder Contains Lead)
Part Number PS2865-1 PS2865-1-F3 PS2865-1-F4 Package 4-pin SOP Packing Style 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel Application Part Number PS2865-1
*1
*1 For the application of the Safety Standard, following part number should be used.
ORDERING INFORMATION (Pb-Free)
Part Number PS2865-1-A PS2865-1-F3-A PS2865-1-F4-A Package 4-pin SOP Packing Style 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel Application Part Number PS2865-1
*1
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Parameter Diode Forward Current (DC) Power Dissipation Peak Forward Current Transistor
*1
Symbol IF PD IFP VCEO VECO IC
Ratings 50 60 1.0 40 5 40 1.2 120 2 500 -55 to +100 -55 to +150
Unit mA mW A V V mA mW/C mW Vr.m.s. C C
Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation
PC/C
PC BV TA Tstg
Isolation Voltage
*2
Operating Ambient Temperature Storage Temperature
*1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output
Data Sheet PN10259EJ01V0DS
3
PS2865-1
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter Diode Forward Voltage Terminal Capacitance Transistor Collector to Emitter Dark Current Coupled Current Transfer Ratio (IC/IF)
*1
Symbol VF Ct ICEO IF = 5 mA
Conditions
MIN.
TYP. 1.1 30
MAX. 1.4
Unit V pF
V = 0 V, f = 1 MHz IF = 0 mA, VCE = 40 V IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 2 mA
11
100
nA
CTR
50
200
400
%
Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time
*2
VCE (sat)
0.3
V
RI-O CI-O tr tf
VI-O = 1 kVDC V = 0 V, f = 1 MHz VCC = 5 V, IC = 2 mA, RL = 100
10
0.4 4 5
pF
s
*2
*1 CTR rank N: 50 to 400 (%) *2 Test circuit for switching time
Pulse Input PW = 100 s Duty cycle = 1/10
IF VCC
In monitor
50 RL = 100
VOUT
4
Data Sheet PN10259EJ01V0DS
PS2865-1
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
210 180 150 120 90 60 30 0 25 50 75 100
100
Diode Power Dissipation PD (mW)
80
60
40
20
0
25
50
75
100
Ambient Temperature TA (C)
Ambient Temperature TA ( C)
FORWARD CURRENT vs. FORWARD VOLTAGE
100
COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE
35 30
IF = 25 mA 20 mA 15 mA
10
Collector Current IC (mA)
Forward Current IF (mA)
TA = +100 C +60 C +25 C
25 20 15 10 5
5 mA 10 mA
1
0 C -25 C -50 C
0.1
0.01 0.0
0.5
1.0
1.5
2.0
0
2
4
6
8
10
Forward Voltage VF (V)
Collector to Emitter Voltage VCE (V)
COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE
Collector to Emitter Dark Current ICEO (nA)
COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE
100
10 mA 5 mA 2 mA
10 000
1 000
VCE = 20 V 40 V
Collector Current IC (mA)
10
100
1
IF = 1mA
10
1 -25
0
25
50
75
100
0.1 0.0
0.2
0.4
0.6
0.8
1.0
Ambient Temperature TA (C)
Collector Saturation Voltage VCE(sat) (V)
Data Sheet PN10259EJ01V0DS
5
PS2865-1
NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE
Normalized Current Transfer Ratio CTR
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25
400
CURRENT TRANSFER RATIO vs. FORWARD CURRENT
Current Transfer Ratio CTR (%)
350 VCE = 5 V, n=3 300 250 200 150 100 50 0 0.1 1 10 100
Sample A B C
Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V
50 75 100
Ambient Temperature TA (C)
Forward Current IF (mA)
SWITCHING TIME vs. LOAD RESISTANCE
100 IC = 2 mA, VCC = 5 V, CTR = 200 %
1 000
SWITCHING TIME vs. LOAD RESISTANCE
IF = 1 mA, VCC = 5 V, CTR = 200 %
tf
Switching Time t (s)
Switching Time t ( s)
100
ts
10
tf tr td
10
tr
1
td
1 10
ts
100
1k
10 k
0.1 10
100
1k
10 k
100 k
Load Resistance RL ()
Load Resistance RL ()
FREQUENCY RESPONSE
1.2
LONG TERM CTR DEGRADATION
IF = 5 mA
0
1.0
CTR (Relative Value)
Normalized Gain Gv
-5
RL = 1 k
100
0.8 0.6 0.4 0.2 0.0
IF = 1 mA, TA = 25 C IF = 5 mA, TA = 25 C IF = 20 mA, TA = 25 C IF = 20 mA, TA = 60 C
-10 -15 -20 -25 0.1
300
1
10
100
1 000
1
102
103
104
105
106
Frequency f (kHz)
Time (Hr)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PN10259EJ01V0DS
PS2865-1
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.00.1
4.00.1
1.750.1
1.5+0.1 -0
7.550.1
2.8 MAX.
7.50.1
16.00.3
0.3
1.550.1
4.00.1
2.850.1
2.30.1
Tape Direction
PS2865-1-F3 PS2865-1-F4
N65 003
N65 003
N65 003
N65 003
Outline and Dimensions (Reel)
2.00.5
3302.0
2.00.5 13.00.2
R 1.0
21.00.8
1001.0
N65 003
N65 003
Packing: 3 500 pcs/reel
N65 003
N65 003
N65 003
N65 003
17.51.0
21.51.0
15.9 to 19.4 Outer edge of flange
Data Sheet PN10259EJ01V0DS
7
PS2865-1
NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering
* Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C or below (package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s
235 C (peak temperature) 210 C
to 30 s
100 to 160 C
60 to 120 s (preheating)
Time (s)
(2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.
8
Data Sheet PN10259EJ01V0DS
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of PS2865-1

	To Download PS2865-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .